Fly · Mavic 4 Pro
Grid or crosshatch. Type values. Auto-export KMZ from this browser.
Pattern
Photo capture
Finish
Data points · type or pick on 2D map
RC 2 steps
- RC 2: DJI Fly → Waypoint → two dummy points → save CALLIS-SLOT before USB.
- Plan this paddock (photogrammetry grid) or open MavenRoute.
- USB-C front port → File transfer. Write KMZ onto CALLIS-SLOT, or use MavenBridge.
- Unplug. Outside, props on. DJI Fly → CALLIS-SLOT. Map is this paddock, not the dummy two-pointer.
Before start
- GNSS green / strong
- Camera = wide 28 mm
- 25 MP
- Gimbal −90°
- Photo mode, not video
- Mechanical / electronic ND if it is bright, so shutter stays fast
- Lock exposure if you can; do not let auto pump mid-grid
In the air
- Take off to a clear hover. Start the route. Hands off unless you abort.
- When it finishes, land, motors off, card out.
If Fly opens the mission and the path is garbage or it refuses to start, the KMZ was not a DJI Fly export. Export again. Do not fly a waypoint file that looks wrong on the RC map.
E · After the card is out
That KMZ + the photo folder is one Flight on this dash. Then WebODM: ortho + VARI, not NDVI.
Flights